Table of Contents
Advertisement
C–62
B
S
20
ASI C
E TT IN G S
Picture 89
RX menu HF
Picture 90
RX/TX
Pushing the button RX/TX located in the cluster MODE will call up two types
of menus which gives access to various basic settings for RX and TX.
If the last used menus (TX or RX) will be called up.
Depending on whether HF or VHF is selected the menus and display
described below may vary.
RX menu HF
Select antenna #1 or – second press – antenna #1 for TX and an additional
RX antenna. Softkey will be shown invers. The Display will show ANT 1 or
ANT 1 RX if appropriate.
Select antenna #2 – softkey will be shown invers. The Display will show ANT
2 if appropriate.
Preamplifier may be switches ON, ON + 7kHz HPF and ON + 14kHz HPF.
Softkey will be shown invers. The Display will show blank, AMP, AMP 7+ or
AMP 14+
Preselector may be switches ON or OFF. Softkey will be shown invers. The
Display will show Preselect in the status field if appropriate.
This softkey will give access to a sub menu to select different roofing filters
and to activate the attenuator
Access to TX menu
When working VHF preselector is not available (see below).
Part C Installation And Operation
Advertisement
Table of Contents
