Numerical Frequency Input - Hilberling PT-8000 Operating Manual

11.2 Numerical Frequency Input

Pressing ENTER (located in the cluster MODE) will activate the numerical
frequency input.
When pressing ENTER
Pi t 37
The number of blanks/digits shown depends on the resolution selected
(see10.4 VFO menu).
ENTER menu
Picture 39
PT-8000 A · B · C User Manual
•
•
•
Pushing ESC soft key will terminate the numerical input. The last used
frequency will be displayed instead. The last used menu will be called up
Pushing deletes the last numerical input. The curser will reappear at the
position
Pushing ENTER soft key acknowledges the frequency input. The last used
soft key menu will be called up.
The frequency display will show blanks for all
digits. A cursor indicates which field can be
edited.
Pressing the respective numbers from 1.8
28 9 allocated to the BAND buttons (located in
the cluster BAND) and 0 VHF (located in the
cluster MODE) will insert the digits from left to
right.
The ENTER menu will call up
C–33
Picture 38
1 to