Table of Contents
Advertisement
C–34
Part C Installation And Operation
It is not necessary to key all digits. Pushing ENTER after the last digit will set
all lower digits to zero. After a valid numerical input is acknowledged the
frequency will be displayed and the respective RX will operate on that
frequency.
After the least significant digit is typed in the numerical input is terminated and
the frequency is transferred to the respective VFO.
In case the input is not acknowledged through ENTER soft key or finished
after 10 seconds the numerical input will be terminated and the last frequency
used will be selected again. The last used soft key menu will be called up.
In case the input frequency is a valid BAND frequency one of the stored
frequency in that BAND will be overwritten by the numerical input.
Advertisement
Table of Contents
