Band Select; Hf Bands - Hilberling PT-8000 Operating Manual

To select a frequency four different means are available:
7.
8.
9.
10.

11.1 BAND select

11.1.1 HF BANDS

Picture 33
Mode and bandwidth are stored together with the respective frequency.
The following BANDS are defined in the PT-8000 software
Pushbutton
1.8 1
3.5 2
n/a
7.0 3
10 4
14 5
18 6
21 7
24 8
28 9
0 VHF + Soft key
0 VHF + Soft key
PT-8000 A · B · C User Manual
Select a BAND
Numerical input
Recall from a channel
Tuning with VFO
Pressing a BAND pushbutton selects one of
two stored frequency within the desired BAND.
The last used frequency of this BAND will be
recalled. Pressing BAND again will toggle
between the last two frequencies used within
this BAND.
In case the BAND limits are exceeded trough
tuning the last valid frequency that has been
stored will remain.
Band
160 m
80 m
60 m 5.3305 / 5.3465 / 5.3665 / 5.3715 / 5.4035 MHz
40 m
30 m 10.100
20 m 14.000
17 m 18.068
15 m 21.000
12 m 24.890
10 m 28.000
6 m 50.000
2 m 144.000
Frequencies
1.800 ... 2.000 MHz
3.500 ... 4.000 MHz
7.000 ... 7.300 MHz
... 10.150 MHz
... 14.350 MHz
... 18.168 MHz
... 21.450 MHz
... 24.990 MHz
... 29.700 MHz
... 54.000 MHz
... 148.000 MHz
C–29
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Table 10