Table of Contents
Advertisement
C–28
DATA menu
Picture 32
Termination of
DATA Operation
11
S
E L E C T I N G
Pressing DATA will call up the DATA soft key menu:
•
•
•
Signals at the 0dBm input will be transmitted
Signals at the DATA input will be transmitted
TX 0dBm and TX DATA are working alternatively. Only one signal can be
selected
DATA mode may be selected in all modes
If DATA mode is not selected PTT through RS232 handshake signal is not
possible
Pressing the DATA pushbutton again will terminate the DATA modus but only
if the DATA menu is displayed. Call up of this menu is mandatory for the
termination. After termination the DATA-LED will be off.
F
RE Q U E N C I ES
Part C Installation And Operation
DATA - LED will turn on
If ISB mode is activated the ISB menu will be
called up. Otherwise the following menu will be
displayed
Advertisement
Table of Contents
