Table of Contents
Advertisement
C–68
21.4 TX-PWR
Picture 102
21.5 VOX
Picture 103
21.6 ANTI-TRIP
Picture 104
21.7 DELAY (of VOX)
Picture 105
21.8 Monitoring Function (MONITOR)
Picture 106
Part C Installation And Operation
Pushing the TX-PWR control will toggle the transmitter
between low- and high power (10/25 Watts on HF/VHF
and 100/600Watts on HF for Model A/B). Turning the
knob allows continuous variation of power output in
these two ranges.
If VOX has been turned on this control adjusts the
trigger level for VOX activation. Adjust sensitivity to your
convenience and speech habits.
Signals from the speaker(s) might trigger or trip the VOX
unintentionally. ANTI-TRIP will countereffect this. Adjust
to get both reliable action and anti-trip of VOX circuit.
DELAY of VOX circuit allows to adjust the hold time of
VOX activation hence to get smooth VOX operation and
to counteract any VOX switching between fluently
spoken voice.
Turning the MONITOR control will adjust the volume auf
the audio to monitor the transmission of PT-8000.
Advertisement
Table of Contents
