Table of Contents
Advertisement
CHANNEL
information display
Bank #
Channel #
Termination of
CHANNEL Operation
PT-8000 A · B · C User Manual
Mode
Bandwidth
After selecting the memory bank (#1 ... #3) the control MEM/CH / STEP-VFO
gives access to the 99 stored frequencies.
Both MAIN- and SUB-RX can read and write into the memory
Channels which are selected for SCAN operation are marked by an asterisk
(*). If the frequency of the marked channel lies within the SCAN boundaries it
will be used for SCAN operations.
Pushing CHANNEL again will terminate the CHANNEL operation:
•
•
•
•
Stored Frequency
the last used VFO frequency will be activated
the channel menu will be called up again in case
a different soft key menu was activated during
channel operations
otherwise the channel soft key menu will be left
and the last used soft key menu will be called up
the CHANNEL LED will be off
C–37
Picture 42
SCAN identifier
Advertisement
Table of Contents
