Table of Contents
Advertisement
General Information
This chapter lists the accessories, the specifications and characteristics, and the
recommended test equipment.
Accessories
The following accessories are supplied with the HP 16555A/D Logic Analyzer.
Accessories Supplied
Probe Tip Assembly, Qty 4
Grabbers, Qty 4 packages
Extra Probe Leads, Qty 1 package
Extra Probe Grounds, Qty 4 packages
Probe Cables, Qty 2
Probe Cable and Pod Labels, Qty 1
Double Probe Adapter, Qty 1
Ferrite Core Assembly, Qty 2
Accessories Available
The accessories available for the HP 16555A/D are listed in the Accessories for HP Logic
Analyzers brochure.
Operating System
With HP 16500B Mainframe
The HP 16555D Logic Analyzer requires operating system version v3.10 or higher.
For the HP 16555A, the version of the operating system software depends on the
programmable logic device that is the CPU interface. To verify the version of the
programmable device, first locate the device, which is at the front of the HP 16555A board. If
the programmable device has part number 16555-80001, then the device requires operating
system version v2.xx, and the maximum state acquisition speed is 100 MHz. If the device has
part number 16555-80002 or higher, then the device requires operating system v3.00 or
higher, and the maximum state acquisition speed is 110 MHz for single-clock, single-edge
clocking mode. You should always use the latest release, and must use version numbers that
are compatible with your device.
With HP 16500C Mainframe
The HP 16555A/D Logic Analyzer requires operating system version v1.00 or higher.
1–2
HP Part Number
01650-61608
5090-4356
5959-9333
5959-9334
16555-61606
01650-94310
16542-61607
16555-60001
Advertisement
Table of Contents
