Table of Contents
Advertisement
To perform the self-tests and make the test connectors
The self-tests verify the correct operation of the logic analyzer module. Self-tests can
be performed all at once or one at a time. While testing the performance of the
module, run the self-test all at once.
The test connectors connect the analyzer to the test equipment.
Perform the self-tests
Disconnect all inputs.
1
In the System Configuration menu, touch Configuration. In the pop-up, touch Test.
2
Touch the box labeled Touch Box to Load Test System.
3
On the test system screen, touch Test System. Select the module to be tested. For
4
an HP 16555A, select 1M Sample LA as the module to be tested. For an HP 16555D,
select 2M Sample LA.
3–3
Advertisement
Table of Contents
