Table of Contents
Advertisement
Connect the logic analyzer
Using the 6-by-2 test connectors, connect the logic analyzer clock and data channels
1
listed in the table below to the pulse generator.
Using the SMA cables, connect channel 1, channel 2, and trigger from the
2
oscilloscope to the pulse generator.
Connect the Logic Analyzer to the Pulse Generator
Connect to HP 8131A
Channel 1 Output
Pod 1, channel 3
Pod 2, channel 3
Pod 3, channel 3
Pod 4, channel 3
To test the single-clock, multiple-edge, state acquisition
Connect to HP 8131A
Connect to HP 8131A
Channel 1 Output
Channel 2 Output
Pod 1, channel 11
J-clock
Pod 2, channel 11
K-clock
Pod 3, channel 11
L-clock
Pod 4, channel 11
M-clock
Testing Performance
3–45
Advertisement
Table of Contents
