Table of Contents
Advertisement
2.3.
Connection – picture signal cable
Connect the female picture signal cable's
the male
WATERBLUE
Disconnect the female 4pin HSD connector of the factory harness at the rear side of
the monitor and connect it to the male
enclosed picture cable.
Connect the female
picture signal cable to the previously become free male HSD connector at the
monitor's rear side.
Caution: The picture signal cable has to be connected to the monitor.
head unit may cause damage to the system!
Note: No liability for vehicle wire colours and pin definition!
Changes by the vehicle manufacturer are possible. The given information has to be verified
by the installer.
Version 07.10.2021
All manuals and user guides at all-guides.com
WATERBLUE
coloured HSD+2 connector of the video interface.
PURPLE
WATERBLUE
coloured HSD connector of the enclosed 4pin HSD
HW: CAM(100)/(V50+V41)
coloured HSD+2 connector to
coloured HSD connector of the
Connection to the
RL4-ELiNK
Advertisement
Table of Contents
