Warning Notes, Concerning The Installation Of Ribbon Cables; Connection - 20Pin Picture Signal Cable - NavLinkz RL4-MIB2-E18 Manual
Video-inserter vw vehicles with mib2 gp composition color infotainment and 6.5 zoll monitor seat vehicles with mib2 gp media system touch color infotainment and 6.5 zoll monitor skoda vehicles with mib2 gp-radio swing infotainment and 6.5inch monitor
Table of Contents
Advertisement
2.5.1. Warning notes, concernin the installation of ribbon cables
1) The contacting ends of ribbon cables always have to be installed in a straight and precise
180° position to the connector. Each deviation from a perfect contact position will curse
faulty contact and even danger of short circuit
2) The ribbon cable's contacting side always has to correspond to the contacting side of the
connector, concerning the mounting position.
2.6.
Connection – 20pin picture signal cable
Connect the female 20pin connector of the daughter PCB's pre-connected 20pin
picture signal cable to the video interface's male 20pin connector.
Version 24.02.2021
HW CAM(V100) / (V35, V36, V40)
RL4-MIB2-E18
Advertisement
Table of Contents
