Table of Contents
Advertisement
2.4.
Connection – picture signal cable
Remove the
grey
female 4pin HSD connector from the rearside of the factory head unit and connect it
to the aubergine colored male 4pin HSD connector of the picture signal cable.
Connect the
waterblue
to the previously become free
or
pink
coloured!) male 4pin HSD connector of the factory head-unit.
Connect the
waterblue
to the male HSD+2 connector of the video-interface.
Note: No liability for vehicle wire colours and pin definition!
Changes by the vehicle manufacturer are possible. The given information has to be verified
by the installer.
Version 04.08.2022
(Depending on the head-unit, possibly also white or
colored female 4pin HSD connector of the picture signal cable
grey
(Depending on the head-unit, possibly also white
colored female HSD+2 connector of the picture signal cable
HW CAM(V31)/(V22)
pink
coloured!)
RL2-MMI3G
Advertisement
Table of Contents
