Connecting The Power Supply - Waterous AQUIS 1.5 Installation, Operation And Maintenance Instructions

Safety Introduction
frame and set them aside (Figure
1
2
3
1. Screw
2. Remove the cover and set it aside.
Product Overview
33).
2. Washer 3. Cover
Figure 33
Installation Operation

Connecting the Power Supply

High Current
Current can cause serious
•
injury or death.
Disconnect the power
•
before servicing the pump.
Read and understand the following statements before continuing:
• The pump motor uses 30 A to 100 A of current to operate.
• Electrical current is dangerous and can cause serious injury or death.
• Do not attempt to connect the pump motor to the power source if you
have not been trained and understand the safety practices needed to
install devices requiring 30 A to 100 A to operate.
Ensure the power source used meets the following specifications:
|
42 64
Maintenance
Model Model Voltage Voltage Amps Amps
AQUIS 1.5 AQUIS 1.5
12 Vdc 50 A
24 Vdc 30 A
AQUIS 3.0 AQUIS 3.0 12 Vdc 80 A
24 Vdc 50 A
AQUIS 6.0 AQUIS 6.0 12 Vdc 100 A
24 Vdc 80 A
Troubleshooting