Table of Contents
Advertisement
Safety
Introduction
Safety Precautions
• Read and understand this document before you begin the installation.
• Read and understand all the notices and safety precautions.
• Be aware that these instructions are only guidelines and are not meant to
be definitive. Contact Waterous when you have questions about installing or
operating this equipment.
• Do not install this equipment if you are not familiar with the tools and skills
needed to safely perform required procedures—proper installation is the
responsibility of the purchaser.
• Do not operate the equipment when safety guards are removed.
• Do not modify the equipment.
• Regularly check for leaks, worn, or deteriorated parts.
• Waterous reserves the right to make modifications to the system without
notice.
Product Overview
Installation
Operation
NOTICE
Before operating the
AQUIS™ Foam
Proportioning System:
• Check the foam pump oil level
and fill if necessary.
• Remove the foam pump
shipping plug and replace it
with the vented oil cap.
NOTICE
High Current
High current from welding
•
or jump start can damage
electronic components.
Disconnect all ground
•
wire connections before
jumping or welding.
|
4
64
Maintenance
Troubleshooting
Refer to instruction
F-1031-2447 for
detailed information.
Advertisement
Table of Contents
