Table of Contents
Advertisement
Solid
The port has established a 100Mbps link to a network
amber
device.
Flashing
The port is transmitting or receiving packets at
amber
100Mbps.
Off
Possible causes of this state are listed here:
- The SFP transceiver port is empty.
- The SFP transceiver is not connected to a network
- The LEDs are turned off. To turn on the LEDs, use
SYSTEM LED
The GS950/18PS V2, GS950/28PS V2, and GS950/52PS V2
Switches have a SYSTEM LED on the left side of the faceplates.
Green
Red
Off
20
device or the device is powered off.
the eco-friendly button.
The power supply is operating normally.
A cooling fan has failed.
Possible conditions of this state include:
- The power supply is not receiving power.
- The switch has overheated and shut down.
- The input AC power is outside the permitted
operating range.
- The power supply has failed.
GS950PS V2 Series Quick Installation Guide
Advertisement
Table of Contents
