Inserting Batteries - Assa Abloy effeff ANYKEY 496 Mounting Instructions

Inserting batteries

A
Important!
Unintentional locking of the door: Once the batteries have been inserted, the
fitting is immediately decoupled. The door can then only be opened from the
outside with the valid mastercode or via the locking cylinder. Ensure that you
have the suitable key with you or that you know the mastercode when you close
the door from the outside.
I
Note!
Four new AA (Mignon) batteries are required for commissioning.
We recommend: Alkaline Batteries e.g. DURACELL® ULTRA M3, DURACELL®
PROCELL or Energizer® Ultimate.
1 Insert the four batteries into the battery compartment.
 The door fitting is deactivated.
 The door fitting is operational.
Fig. 12 :
Inserting batteries
47
Electrical connection EN