Mounting Spacer Nuts - Assa Abloy effeff ANYKEY 496 Mounting Instructions

I
Fig. 5 :
Mounting the
middle spacer nut
Mounting

Mounting spacer nuts

Note!
Hold the outer fitting firmly on the door leaf during the entire mounting process.
1 Place the outer fitting (Fig. 5 –
2 Press the outer fitting against the door leaf.
3 Screw a hexagonal nut (–
threaded bolt (–
4 Tighten the hexagonal nut until it disappears completely into the hole and
lies flush with the surface of the door leaf.
5 Turn the hexagonal nut exactly a quarter turn further.The hexagonal nut is
now exactly 0.2 mm below the surface of the door leaf.
 You have mounted the middle spacer nut.
2
1
1
) on the door leaf (–
4
) onto the central
3
).
3
2
).
3
+ ¼
4
3
= 0,2 mm
4
39
EN