Fig. 6 :
Mounting
remaining spacer
nuts
EN
40
6
Mount the remaining two hexagonal nuts.
7
Push the outer fitting upwards (for the upper hexagonal nut) or downwards
(for the lower hexagonal nut) against the door leaf.
8
Turn one hexagonal nut (Fig. 6 –
lower threaded bolt respectively (Fig. 6 –
9
Tighten the hexagonal nuts until they disappear completely into the drilled
hole and lies flush with the surface of the door leaf.
10 Turn the hexagonal nuts exactly a quarter turn further.The hexagonal nuts are
now exactly 0.2 mm below the surface of the door leaf.
You have mounted all spacer nuts.
2
and –
1
¼
+
2
3
¼
+
4
4
) on the upper and one on the
1
3
and –
).
= 0,2 mm
= 0,2 mm
Mounting