A
Fig. 13 :
Closing the
housing
EN
48
Closing the housing
Important!
Damage to the ribbon cable: The ribbon cable may become clamped and
damaged when the housing is being mounted. Position the ribbon cable carefully.
Make sure that the ribbon cable is not clamped.
Damage to the door handle:The door handle may be scratched when the
decorative housing is being pushed on. Only remove the protective sleeve once
the decorative housing has been mounted.
1
Push the decorative housing (Fig. 13 –
the inner fitting (–
2
Fasten the decorative housing with two countersunk screws (–
The housing is closed. The security fitting is ready for use.
1
3
).
3
1
2
) over the door handle (–
Electrical connection
2
) onto
4
).
4