Mounting The Inner Fitting - Assa Abloy effeff ANYKEY 496 Mounting Instructions

A
I
Mounting

Mounting the inner fitting

Important!
Risk of damage to the thread due to incorrectly positioned sleeve nut.The
sleeve nut must not tilt. It must be easy to screw in. Only use a hexagonal wrench
to tighten the sleeve nuts.
Note!
Hold the outer fitting firmly on the door leaf during the entire mounting process.
1 Press the outer fitting against the door leaf.
2 Place the lock square of the inner fitting in the spindle hub (Fig. 7 –
3 Press the outer fitting against the door leaf.
4 Feed the connecting cable through the cylinder cutout (–
5 Move the ribbon cable (–
6 Push on the inner fitting (–
7 Press the outer fitting against the door leaf.
8 Turn the sleeve nut (–
with a hexagonal wrench.
 You have mounted the inner fitting.
3
) away to the left.
4
).
5
) by hand onto the centre threaded pin and tighten it
1
).
2
).
41
EN