Assa Abloy ACCENTRA 440F Series Installation Instructions Manual

440F Series
Exit Device Trim
Installation Instructions
For use with ASSA ABLOY ACCENTRA™ Exit Devices (Wood and Metal Doors)
441F & 446F Non-Handed
WARNING
This product can expose you to lead which is known to the state of California to cause cancer and birth defects or other
reproductive harm. For more information go to www.P65warnings.ca.gov.
WARNING
Attention Installer: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the
opening, and ASSA ABLOY makes no representations or warranties concerning what such impact may be in any specific
situation. When retrofitting any portion of an existing fire-rated opening, or specifying and installing a new fire-rated opening,
please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all
applicable codes and ratings.
1-855-557-5078 Ext. 2 • www.accentra-assaabloy.com
Copyright © 2008, 2012, 2023, 2024, ASSA ABLOY ACCENTRA™ Access and Egress Hardware Group, Inc. All rights reserved. Reproduction
in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Sectional Lever Trim
LEVER TYPE TRIM TYPE
441F F03 (NL)
Key In Lever
446F F08
Passage
448F
Plain Lever F02
449F F02
* Field Prep: Cut tailpiece off, not to engage the device
All dimensions are in inches (mm) unless otherwise noted.
ABBREVIATION
PPHMS PHILLIPS PAN HEAD MACHINE SCREW
PTHMS PHILLIPS TRUSS HEAD MACHINE SCREW
448F & 449F Non-Handed
DESCRIPTION
Key retract bolt(s) Free wheeling lever
Key locks/unlocks lever Free wheeling lever
Lever retracts bolt(s) Lever always active
Dummy trim* Free wheeling lever
Dummy trim
FASTNER DESCRIPTION
REMARKS
Rigid lever
80-8470-0441-000 04/24