Installing The Wall Insert; Fig. 39: Installing The Wall Insert 1 - ABB PT004165 Operation Manual

Operation Manual / Power2 850-M / High-pressure stage
9 Disassembly and assembly / 9.13 Installing the wall insert
Use the special key only for nuts that are difficult to access and observe the reduced
u
torque.
9.13

Installing the wall insert

Fig. 39: Installing the wall insert 1
1. Fit bracket (90030). (Installation of bracket
2. Secure lifting gear to swivel lifting eye (90657) and lift wall insert (77000).
3. Remove support angle (90450).
4. Fit a new O-ring (77040).
5. Move in wall insert (77000) until bracket can be removed.
© Copyright 2022 ABB. All rights reserved.
(see Fig. 24: Removing wall insert 2
HZTL4063_EN
→70))
Rev.F March 2022