Measuring Axial Clearance A; Fig. 32: Measuring Axial Clearance A; Table 41: Axial Clearance A - ABB PT004165 Operation Manual

Operation Manual / Power2 850-M / High-pressure stage
9 Disassembly and assembly / 9.9 Measuring axial clearance A
9.9

Measuring axial clearance A

CAUTION
Clearances outside the tolerance
Serious damage to engines or property can be caused by clearances outside
the tolerance and excessively worn parts.
Have the components assessed and, if necessary, replaced by a Turbo
u
Systems service station.
Fig. 32: Measuring axial clearance A
The axial clearance (A) must be measured after removal and before installation of the cart-
ridge group.
Measure and note axial clearance (A).
u
Table 41: Axial clearance A
© Copyright 2022 ABB. All rights reserved.
Axial clearance A
[mm]
0.36 ... 0.48
HZTL4063_EN Rev.F March 2022