Safe Maintenance - ABB PT004165 Operation Manual

Operation Manual / Power2 850-M / High-pressure stage
2 Safety / 2.14 Safe maintenance
2.14

Safe maintenance

Occupational safety
WARNING
Injuries to persons
Severe injuries to personnel or fatal accidents can be caused by mechanical
influences as a consequence of hazardous and inadequate operational pro-
cedures or non-compliance with safety and health standards.
When working on the Power2, always wear safety footwear and protect-
u
ive clothing to protect against mechanical hazards.
Keep personal protective equipment in perfect condition.
u
Obey mandatory signs.
u
Observe the general rules for occupational safety and prevention of acci-
u
dents.
Only perform operations that are described in this chapter.
u
Only perform operations for which you have received instruction or train-
u
ing.
Wear safety footwear to protect against mechanical hazard and risk of fall-
ing.
Wear protective clothing.
WARNING
Risk of falling
When work is performed on the low-pressure or high-pressure stage, there
is a risk of falling.
Do not climb onto the low-pressure or high-pressure stage or onto at-
u
tached parts and do not use them as climbing aids.
Use suitable climbing aids and working platforms for work above body
u
height.
Only perform work on the low-pressure or high-pressure stage when you are in a physic-
u
ally and psychologically stable condition.
Only work with suitable tools, equipment and appliances that function properly.
u
Keep the workplace clean; clear away any loose objects and obstacles on the floor.
u
Keep the floor, equipment and the low-pressure and high-pressure stage clean.
u
Have oil binding agents ready and provide or keep oil pans at hand.
u
Use of assembly devices
Assembly devices are specially constructed and designed for the defined use; they are not
commercially available products.
Use assembly devices only for the described applications.
u
© Copyright 2022 ABB. All rights reserved. HZTL4063_EN Rev.F March 2022