Rating Plate Of The High-Pressure Stage; Fig. 7: Rating Plate; Table 4: Operating Limits; Table 5: Recommended Replacement Intervals - ABB PT004165 Operation Manual

Operation Manual / Power2 850-M / High-pressure stage
2 Safety / 2.8 Rating plate of the high-pressure stage
2.8

Rating plate of the high-pressure stage

Fig. 7: Rating plate
Operating limits
1 Operating limits at engine overload (110%). In test rig operation only, unless otherwise
agreed with the enginebuilder.
2 Operating limits during operation
Table 4: Operating limits
Recommended replacement intervals
3 Replacement interval of plain bearings in 1000 h
4 Replacement interval of compressor in 1000 h
5 Replacement interval of turbine in 1000 h
Table 5: Recommended replacement intervals
Further data
6 Power2 designation
7 Power2 serial number
8 Power2 stage
9 Serial number of the low or high-pressure stage
10 Year of construction of the low or high-pressure stage
11 Weight of the low or high-pressure stage
12 Part number of the customer of the low or high-pressure stage
Table 6: Further data
Explanations of the rating plate
The recommended replacement intervals and the corresponding operating limits are jointly
defined with the enginebuilder. This information is specific to the system.
The operating limits of the low-pressure stage are generally different from the operating
limits of the high-pressure stage.
Operation above the indicated values n
replacement intervals. In such cases, Turbo Systems recommends contacting the nearest
Turbo Systems service station.
© Copyright 2022 ABB. All rights reserved.
, t can considerably shorten the recommended
Bmax Bmax
HZTL4063_EN Rev.F March 2022