Fig. 43: Cover Plate / Gasket And Sleeves; Table 49: Cover Plate / Gasket - ABB PT004165 Operation Manual

Operation Manual / Power2 850-M / High-pressure stage
10 Taking out of operation at short notice / 10.1 Possible emergency re-
pairs
10.1.1 Manufacturing the cover plate
The cover plate and the other parts that are required are not part of the scope of delivery of
Turbo Systems and must be manufactured by the operator on the basis of the drawing
Fig. 43: Cover plate / gasket and sleeves
Parts required
¡
1 cover plate (01) (recommended material: 1.4541 / 1.4571)
¡
1 gasket (02) (temperature resistant up to 550 °C)
¡
8 sleeves (03)
Fig. 43: Cover plate / gasket and sleeves
Cover plate (gasket) and sleeves dimensions [mm]
Ø1 Ø2
406 376
Table 49: Cover plate / gasket
© Copyright 2022 ABB. All rights reserved.
→87).
Ø3 Ø4
14 14
HZTL4063_EN
Ø5 B1
20 10
Rev.F
(see
B2
49
March 2022