Lubricating Oil Temperature; Table 13: Lubricating Oil Temperature - ABB PT004165 Operation Manual

Operation Manual / Power2 850-M / High-pressure stage
5 Monitoring during operation / 5.2 Lubricating oil temperature
5.2

Lubricating oil temperature

CAUTION
Machine damage
If the oil temperature at the oil inlet exceeds the admissible range, this may
lead to engine damage.
Observe oil temperature at the oil inlet according to the following table.
u
Power2 Status for operation
850 Admissible
Temporarily admissible (< 1 h) -> Alarm
Not admissible -> stop engine
Not admissible -> preheat oil prior before
start
Table 13: Lubricating oil temperature
The specified maximum oil outlet temperature is considered to be an alarm value for the op-
eration of the low-pressure and high-pressure stage and must be monitored according to
the current regulations.
If the low-pressure or high-pressure stage has been operated outside of the admissible
range for a long period of time, Turbo Systems recommends having the low-pressure or
high-pressure stage inspected by an Turbo Systems service station.
© Copyright 2022 ABB. All rights reserved.
Oil temperature at
the inlet
T [°C]
oil,inlet
< 90
90 ... 95
> 95
< 30
HZTL4063_EN
Oil temperature at
the outlet
T [°C]
oil,inlet
< 150
150 ... 155
> 155
- -
Rev.F March 2022