Rating Plate Of The High-Pressure Stage; Fig. 7: Rating Plate; Table 4: Operating Limits; Table 5: Recommended Inspection And Replacement Intervals - ABB Turbo Systems Switzerland Power2 550-M44 Operation Manual

Operation Manual / Power2 550-M / High-pressure stage
2 Safety / 2.8 Rating plate of the high-pressure stage
2.8

Rating plate of the high-pressure stage

Fig. 7: Rating plate
Operating limits
1 Operating limits at engine overload (110%). In test rig operation only, unless otherwise
agreed with the enginebuilder.
2 Operating limits during operation
Table 4: Operating limits
Recommended inspection and replacement intervals
3 Inspection interval of plain bearings in 1000 h
4 Replacement interval of compressor in 1000 h
5 Replacement interval of turbine in 1000 h
Table 5: Recommended inspection and replacement intervals
Further data
6 Power2 designation
7 Power2 serial number
8 Power2 stage
9 Serial number of the low or high-pressure stage
10 Year of construction of the low or high-pressure stage
11 Weight of the low or high-pressure stage
12 Part number of the customer of the low or high-pressure stage
Table 6: Further data
© Copyright 2022 ABB. All rights reserved. HZTL4058_EN Rev.F March 2022