Table of Contents
Advertisement
User Manual of DS-6700 Series Audio/Video Encoder
Chapter 12 Log Search and Maintenance
12.1 Log Search
Purpose
The operation, alarm, exception and information of the device can be stored in log files, which can be viewed and
exported at any time.
Before you start
The Log function can be realized only when the Encoder is connected with HDD (for DS-6700HWI/HFI-SATA) or
network disk. And make sure the HDD or network disk has been initialized for the first time to use
Section 7.3.6 Adding Network Disk for details.
Steps:
1.
Click Log on the menu bar to enter the Log interface.
2.
Set the log search conditions to refine your search, including the Major Type, Minor Type, Start Time and End
Time.
3.
Click the Search button to start searching log files.
4.
The matched log files will be displayed on the list shown below.
Note:
Up to 100 log files can be displayed each time.
5.
You can click the
Figure 12.1 Log Search Interface
button to save the searched log files to local directory.
78
.
Please refer to
Hide quick links:
Advertisement
Table of Contents
