Volkswagen Touareg 2010 Workshop Manual page 97

7.2.1 Removing
– Open clamp -1- and remove suction line.
– Pull off engine compartment seal in vicinity of brake servo.
– Remove right plenum chamber cover ⇒ General body repairs,
exterior; Rep. gr. 50 ; Plenum chamber cover .
– Remove bolts -arrows- for coolant expansion tank -1-.
– Slide coolant expansion tank -1- in -direction of arrow- out of
retainer.
– Place coolant expansion tank -1- to one side.
Note
Do not pull off coolant hoses.
– Remove nuts -arrows- and remove bracket -1-.
– Place bracket -1- with lines to one side.
– Remove star disc -arrow B-.
– Unclip coolant hose -1- from retainer -arrow A-.
– Remove right plenum chamber bulkhead ⇒ General body re‐
pairs, exterior; Rep. gr. 50 ; Plenum chamber bulkhead .
– Place sufficient lint-free cloths in plenum chamber in the area
of the brake master cylinder.
– Draw off as much brake fluid as possible from brake fluid res‐
ervoir using brake filling and bleeding equipment -VAS 5234- .
Touareg 2010 ➤
Brake systems - Edition 05.2011
7. Removing and installing brake master cylinder
93