Volkswagen Touareg 2010 Workshop Manual page 69

– Remove convenience system central control unit -J393- with
retainer ⇒ Electrical system; Rep. gr. 97 ; Control units .
Brake pedal position sender -G100- retainer, guide ribs -A- and
bearing bracket -B- have slots to provide a sideways adjustment.
This also prevents twisting.
– Loosen bolts -2- until retainer -1- with brake pedal position
sender -G100- -3- can be moved back and forth in
-direction of arrow-.
– Set dimension -A- so that min. 4 mm to max. 5mm is between
brake pedal position sender -G100- -3- and magnet -4-.
– Tighten bolts -2- again.
– Loosen bolt -4- of magnet retainer -3- until magnet retainer
-3- can be pushed as far as possible in -direction arrow A-
against brake pedal -1-.
– Push stop tab -1- of retainer -2- downwards in
-direction of arrow- (figure section I) until stop tab -1- fasteners
engage on edge of retainer -2- (figure section II).
– Press magnet retainer -1- lightly in -direction of arrow- against
engaged stop tab -2-.
Touareg 2010 ➤
Brake systems - Edition 05.2011
5. Assembly overview - brake pedal
65