Volkswagen Touareg 2010 Workshop Manual page 63

♦ Diagnosis cable -VAS 5051/1- or -VAS 5051/3-
Removing
Note
Do not separate connectors of parking brake motors.
• Electromechanical parking brake not operated.
Connecting -VAS 5051- and selecting functions
– Do do this, select electromechanical parking brake and „mov‐
ing parking brake motor to assembly position" function.
– Use -VAS 5051- to move parking brake motors to assembly
position.
If this is not possible, turn parking brake adjustment nut back.
– Remove rear wheel.
– Remove brake caliper and secure with wire so that weight of
brake caliper does not strain or damage brake hose.
– Remove brake disc/drum.
Note
Mark brake shoes when removing if they are to be reused. Fit in
same position when installing, or braking will be uneven.
– Remove brake shoes
Note
If parking brake motor is to be reused, secure parking brake motor
in brake shoe mounting with a cable tie to prevent it turning.
⇒ page 9
⇒ page 47 .
Brake systems - Edition 05.2011
.
4. Overview of electromechanical parking brake components
Touareg 2010 ➤
59