List Of Error Messages - Omron C200H-ASC11 Manual

List of Error Messages

9-1

List of Error Messages

IR/CIO Area Allocation
Error Type and Code
Example Terminal
Display
242
If an error (BASIC error) is generated during the execution of a BASIC com-
mand, or a system error is generated, the error code is stored in bits 00 to 11,
and the error type is stored in bits 12 to 15 of the IR/CIO area (words n + 7) in
the CPU Unit. At the same time, the relevant error message is displayed on
the terminal. (Only an error code for errors 0080 to 0099 generated by the
CPU Unit interface is stored in words n + 7, and no error message is dis-
played.)
Word Bit
n +7 0 to 11
12 to 15 Error Type
@@@@
Error type: B: BASIC error
SYNTAX ERROR IN LINE XXXX
Note If the execution of a BASIC program is stopped when the terminal port is con-
figured as a non-terminal device, the ASCII Unit will wait for a message to be
displayed. In this case, connect the terminal to the terminal port and press
Ctrl+X Keys, and the message will be displayed.
Name
Error Code 000 to 255 BCD
B: BASIC error
0: System error
1: Port #1 communications error
2: Port #2 communications error
3: Terminal port communications error
(C200H-ASC31 only)
Error code 000 to 255
0: System error
1: Port #1 communications error
2: Port #2 communications error
3: Terminal port communications error (C200H-ASC31 only)
Displayed when executed with a line number.
Section 9-1
Value