Configuring A Drive In Hw Config - Siemens SIMATIC S7 300 Getting Started

Configuration
4.1 Creating a T station
4.1.2.3

Configuring a drive in HW Config

Procedure
Step Activity
1 In the HW catalog, open the tree structure
SIMATIC Technology > PROFIBUS DP(DRIVE) > Drives >
SINAMICS.
2 Select the drive component "SINAMICS S120" from the tree structure of the HW catalog.
3 Drag-and-drop the drive to the PROFIBUS DP master
system of the DP(DRIVE).
4 Enter PROFIBUS address "4", then confirm with "OK".
5 Select the appropriate device version that is suitable for your SINAMICS, for example, 4.4 and confirm
with "OK".
30
Result
The "Properties – PROFIBUS interface
SINAMICS" dialog box opens.
The "Properties - SINAMICS" dialog box
opens.
CPU 317T-3PN/DP: Controlling a SINAMICS S120
Getting Started, 10/2013, A5E00480391-06