Configuration; Creating A T Station; Creating A T Station With Station Wizard - Siemens SIMATIC S7 300 Getting Started

Configuration

4.1

Creating a T station

In the following chapters you will configure a CPU 317T-3PN/DP. To do this, you create a
T station. You can create the T station with or without station wizard.
The station wizard helps you to carry out several steps when configuring a
CPU 317T-3PN/DP in one work cycle.
The configuration "with station wizard" comprises the following steps:
● Creating a T station with station wizard
● Configuring digital input and digital output module
● Configuring a drive in HW Config
The configuration "without station wizard" comprises the following steps:
● Configuring CPU 317T-3PN/DP in HW Config
● Activating generation of the technology system data
● Configuring a drive in HW Config
● Configuring the PG/PC interface for access to the drive
● Downloading the hardware configuration to the target hardware
4.1.1

Creating a T station with station wizard

4.1.1.1 Creating a T station with station wizard
The station wizard helps you to carry out several steps when configuring a
CPU 317T-3PN/DP in one work cycle.
Procedure
Step Activity
1 Set up a new project in the SIMATIC Manager (for example, "GS_317T_3PN-DP_with_S120").
2 Select the Insert > Station > SIMATIC T station menu command.
The "Set up T station" dialog box opens.
CPU 317T-3PN/DP: Controlling a SINAMICS S120
Getting Started, 10/2013, A5E00480391-06
4
15