Siemens SIMATIC S7 300 Getting Started page 23

Step Activity
7 Set the "Synchronize drive to equidistant DP cycle" check box and set the time factors as shown below.
8 Click "Align".
9 Confirm with "OK".
10 Confirm the possible warning with "OK".
11 Start the NetPro network configuration program in HW
Config with Options > Configure network.
CPU 317T-3PN/DP: Controlling a SINAMICS S120
Getting Started, 10/2013, A5E00480391-06
4.1 Creating a T station
Result
The following components are aligned to the
set values:
DP cycle in the DP master system
•
All drive components of the same family
•
(here SINAMICS)
NetPro is started.
Configuration
23