Step
Activity
6
The "DP slave properties" dialog box opens. Open the "Isochronous Operation" tab.
7
Set the "Synchronize drive to equidistant DP cycle" check box and set the time factors as shown below.
8
Click "Align".
9
Confirm with "OK".
10
Confirm the possible warning with "OK".
11
Finalize your HW configuration by calling the Station > Save
and compile command.
CPU 317T-3PN/DP: Controlling a SINAMICS S120
Getting Started, 10/2013, A5E00480391-06
4.1 Creating a T station
Result
The following components are aligned to the
set values:
DP cycle in the DP master system
•
All drive components of the same family
•
(here SINAMICS)
The system compiles your project, and adds
the "Technology Objects" object to the
project window in SIMATIC Manager.
Configuration
31