Siemens SIMATIC S7 300 Getting Started page 59

Step Activity
4 The drive configuration consisting of drive and message frame can be derived from the hardware
configuration and merely has to be confirmed in this dialog box. Enter the normalization speed and the
maximum motor speed (see motor type plate). Click "Data transfer from the drive" and apply the settings
with "Next".
Result: The "Axis configuration - Axis_1 - Encoder assignment" dialog box opens.
CPU 317T-3PN/DP: Controlling a SINAMICS S120
Getting Started, 10/2013, A5E00480391-06
4.4 Configuring axes in S7T Config
Result
Configuration
59