Preparation; Requirements - Siemens SIMATIC S7 300 Getting Started

Preparation

2.1

Requirements

Requirements
The following requirements must be fulfilled:
● You have an S7-300 station, consisting of:
● The following software packages and commissioning tools are correctly installed on your
● The programming device is connected via Ethernet interface to the CPU:
● A SINAMICS S120 is connected to the CPU 317T-3PN/DP via the DP(DRIVE) interface.
CPU 317T-3PN/DP: Controlling a SINAMICS S120
Getting Started, 10/2013, A5E00480391-06
– Power supply (PS), e.g., 6ES7307-1KA02-0AA0
– CPU 317T-3PN/DP with MMC (8 MB or more),
e.g., 6ES7317-7TK10-0AB0 V3.2/V4.1.5
– Optional digital input module (DI) with bus connector, for example,
6ES7321-1BH02-0AA0
– Optional digital output module (DO) with bus connector, for example,
6ES7322-1BH01-0AA0
– Two optional front connectors for the digital modules
programming device with Ethernet interface:
– STEP 7 as of V5.5 SP2
– S7 Technology as of V4.2 SP3
– Ethernet cable IE TP Cord RJ45/RJ45 TP cable 4 x 2 with 2 RJ45 plug-in connectors
0.5 m 6XV1 870-3QE50
1 m 6XV1 870-3QH10
2 m 6XV1 870-3QH20
6 m 6XV1 870-3QH60
10 m 6XV1 870-3QN10
– PROFIBUS cable, e.g., 6ES7901-4BD00-0XA0
2
7