Menu Structure - ProLights BB5PIX User Manual

8

3.3 MENU STRUCTURE

MAIN FUNCTION
AUTO SHOW
SOUND MODE
DIMMER
LED DISPLAY
INFO
DMX MODE
DMX CHANNELS
SLAVE MODE
SENSITIVITY
3.4 OPERATION IN AUTOMATIC MODE
If no DMX control signal is present at the DMX INPUT, the unit independently runs through its show pro-
gramme provided that the blackout mode is switched off:
• Press the button MENU so many times until the display shows [Auto], then press the button ENTER.
• Press the button UP/DOWN to switch between the programs (Au1-Au12), then press the button ENTER.
• Using the button UP/DOWN to select the desired run speed [S 0 - S 100]
• Press the button ENTER to confirm.
The unit will operate in automatic mode.
NOTE - Programs P1 - P6 are fully pre-programmed and will not be altered.
In automatic mode the unit will be set as Master.
BB5PIX
SELECTION 1
Auto
ShMd
dIM
Dim 2 (speed middle)
Led
test
Fhrs
ver
Addr
4Ch
5Ch
SLMd
Sens
SELECTION 2
AU 1 - Au 12
Sh 0 - Sh 12
Off (speed off)
Dim 1 (speed fast)
Dim 3 (speed slow)
on
10 S
20 S
30 S
test
V1.0
1--512
MASt
SL 1
SL 2
0-100
SELECTION 3
S 0 - S 100 (Speed program)