Table of Contents
Advertisement
1
Getting started
1.1
Overview
The
X-STM32MP-MSP01
connector.
The figure below shows the component placement on the board.
The
X-STM32MP-MSP01
interrupts. A DIL 24-pin socket is available for additional MEMS adapters and other sensors.
The I²C sensor hub features on the
The expansion board mounts an LDO to generate 1.8 V for all the MEMS sensors. A level shifter between 1.8
V and 3.3 V translates all the signals between the sensors and the main board. Two LEDs and one switch are
available on the board as the user interface.
UM3076 - Rev 1
is powered via a standard 3.3 V supply through the
Figure 2.
X-STM32MP-MSP01 component placement details
interfaces with the main board via an I²C interface along with some GPIO pins for
ISM330DHCX
are also available by using solder bridges.
UM3076
Getting started
STM32MP157F-DK2
GPIO
page 2/38
Advertisement
Table of Contents
Need help?
Do you have a question about the X-STM32MP-MSP01 and is the answer not in the manual?
Questions and answers