Microphone: Mp23Db02Mm; Table 7. Iis2Mdc Details; Table 8. Mp23Db02Mm Details; Figure 10. Iis2Mdc Circuit - ST X-STM32MP-MSP01 Getting Started

The IIS2MDC
speed (100 kHz, 400 kHz, 1 MHz, and 3.4 MHz).
The device can be configured to generate an interrupt signal for magnetic field detection. It can be used as a
slave device with the
2.7

Microphone: MP23DB02MM

The MP23DB02MM
capacitive sensing element and an IC interface with optional stereo configuration. The sensing element, capable
of detecting acoustic waves, is manufactured using a specialized silicon micromachining process dedicated to
produce audio sensors. It has a narrow sensitivity range of ±1 dB, high SNR, and low distortion for all operative
modes.
Two digital microphones are available on the board to give flexibility for different configurations. Both are mounted
from the bottom with hole on the PCB to input the audio signal.
modes enabled by different clock frequency ranges (power down, low power, and normal mode).
UM3076 - Rev 1
includes an I²C serial bus interface that supports standard, fast mode, fast mode plus, and high-
ISM330DHCX device configured as a master using the solder bridge configuration.
Features
Order code
Package
Operating voltage
is an ultra-compact, low-power, omnidirectional, digital MEMS microphone built with a
Table 8.
Features
Order code
Package
Table 7. IIS2MDC details
Figure 10. IIS2MDC circuit
MP23DB02MM details
MP23DB02MM
Microphone: MP23DB02MM
Description
IIS2MDCTR
12-LGA
1.71 V to 3.6 V
Description
MP23DB02MMTR
RHLGA 5LD
offers multiple performance
UM3076
page 10/38