Performance And Operating Limits - Pentair ISO PRO Installation, Operation And Maintenance Manual

ISO PRO Centrifugal Pump
Section 2.......................................................................Pump Construction
3.8 Coupling and Coupling guards
The pump unit may be supplied with one type of the below three coupling:
Flexible Shaft Coupling – standard
Flexible Shaft Coupling - spacer
Flexible Tyre Coupling
Flexible couplings are provided in various makes and models to suit customer preference. Refer to the
relevant manufacturers Installation, Operation and Maintenance manual for coupling information.
As a standard, galvanised steel Guards and end shields are provided for safety.
3.9 Baseplate
Standard baseplates are made of Mild-steel plates folded galvanized. Non standard bases can be
supplied to suit individual installation circumstances.
3.10 Accessories
Accessories may be fitted when specified by the customer at additional cost.

4. PERFORMANCE AND OPERATING LIMITS

This product has been selected to meet the specifications of your purchase order. These pumps
are furnished for a particular service condition only. Changes in the hydraulic system or Operating
Condition may affect the pump's performance adversely. This is especially true if the changes reduce
the pressure at the suction flange or if the liquid temperature is increased. Contact Pentair Southern
Cross if there is a major change in the operating conditions to verify existing pumps' adequacy.
12