Table of Contents
Advertisement
Section 2.......................................................................Pump Construction
03K2013A09
50X32-200
1. CONFIGURATIONS
Southern Cross ISO-PRO is a single stage, horizontal, end suction process pump with overhung
PSFA1A CC4CP X
impeller and radially split casing. ISO-PRO is fully Compliant with ISO 5199. The range is designed for
continuous service in clean water pumping applications.
2. NOMENCLATURE AND NAME PLATE
A typical example of a Southern Cross Pump Name Plate is shown below.
03K2013A01
150X125-315
PRHG3A CC4XOWX
2.1 Serial Number
The pump serial number is stamped on the name plate as shown above. A typical serial number is
described below.
2.2 Pump Size
2.3 Impeller Diameter (mm)
Actual outside diameter of the impeller in millimeters (if blank, the impeller is full-size)
bar
180
bar
304
bar
ISO PRO Centrifugal Pump
9
Advertisement
Table of Contents
