Table of Contents
Advertisement
ISO PRO Centrifugal Pump
Section 1................................................................Introduction and Safety
access points. A Pump Duty Nameplate is fitted to each unit and must not be removed. Loss of
this plate could make identification impossible. This in turn could affect safety and cause difficulty in
obtaining spare parts.
d. Access to the equipment should be restricted to the personnel responsible for installation, operation
and maintenance of pump unit, adequately qualified and supplied with appropriate tools for their
respective tasks.
e. Pentair Southern Cross requires that, all personnel that are responsible for installation, operation or
maintenance of the equipment, have access to and study the product instruction manual before
any work is done and that they will comply with all local and industry based safety instructions and
regulations.
f. Hearing protection should be worn where the specified equipment noise level exceeds locally
defined safe levels. Safety glasses or goggles should be worn when working with pressurised
systems and hazardous substances. Other personnel protection equipment must be worn where
local rules apply.
g. Do not wear loose clothing or jewelry which could catch on the controls or become trapped in the
equipment.
h. Note the 'Limits of product application – permissible use' specified in the manual.
i. Operation of the equipment beyond these limits will increase the risk from hazards noted below and
may lead to premature and hazardous pump failure.
j. Clear and easy access to all controls, gauges and dials etc., must be maintained at all times.
Hazardous or flammable materials must not be stored in pump rooms unless safe areas or racking
and suitable containers have been provided.
k. Improper Installation, Operation or Maintenance of this Pentair Southern Cross Product could result
in Injury or Death.
8
Advertisement
Table of Contents
