Integrated Peripherals - Albatron PX915PD Series User Manual

PX915PD/ PX915GD Series

Integrated Peripherals

Init Display First
With systems that have multiple video cards, this option determines whether the
primary display uses a PCI slot or an AGP slot. Options: PCIEx (default)、PCI Slot
OnChip IDE Device
IDE HDD Block Mode
Block mode is otherwise known as block transfer, multiple commands, or multiple sector
read/write. Select the "Enabled" option if your IDE hard drive supports block mode (most
new drives do). The system will automatically determine the optimal number of blocks
to read and write per sector. Options: Enabled (default)、Disabled
On-Chip channel0/channel1 PCI IDE
The mainboard chipset contains a PCI IDE interface with support for two IDE channels.
These two IDE channels are for IDE1 and SATA1/2/3/4 connectors use. Select "Enabled" to
activate the first and/or second IDE interface. Select "Disabled" to deactivate the
interface if you are going to install a primary and/or secondary add-in IDE interface.
Options: Enabled (default)、Disabled
IDE channel0/ channel1/Master/Slave PIO
The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4) for each of the
IDE devices that the onboard IDE interface supports. Modes 0 to 4 will increase
performance incrementally. In Auto mode, the system automatically determines the
best mode for each device. Options: Auto (default)、Mode0、Mode1、Mode2、Mode3、
Mode4.
37