Chapter 7. The Control Panel; Changing A Programme - Kernau KDI 4643 User Manual

CHAPTER 7. THE CONTROL PANEL

1. On/Off button
2. Program Selection Button
3. Display
4. Delay Button
5. Half Load Button
1. On/Off Button
Switch the machine on by pressing On / Off button. When machine is on, "--" will be shown on the
Display (3).
2. Program Selection Button
Select a suitable programme for your dishes by pressing Program Selection button. The programme
will start automatically when the door is closed.
3. Display
The Display shows the number and total time of the selected programme alternately and the
remaining time during operation. .
4. Delay Button
Press the Delay button to delay the start time of the selected programme for 1 hour up to 19 hours.
Pressing the button once delays the start time for 1 hour, and continuing to press will increase the
delay time. Press the Delay button to change or cancel the delayed start. If you switch off the
machine while delay timer is active, the delayed time is cancelled.
5. Half Load Button
- Press the Half Load button to reduce the duration of the selected programme, and therefore
decrease your energy and water consumption. When Half Load option is selected, Half Load led (i)
will illuminate.
NOTE: If you decide not to start the selected programme, please see the "Changing a Programme"
and "Cancelling a Programme" sections.
NOTE: When there is insufficient softening salt, the Salt Lack Warning Indicator (v) will illuminate
to indicate the salt chamber needs filling.
NOTE: When there is insufficient rinse aid, the Rinse Aid Lack Warning Indicator (vi) will
illuminate to indicate the rinse aid chamber needs filling.
3 1 2
4
i. Half Load Led
ii. Salt Indicator
iii. Rinse Aid Indicator
5 i iii
ii
EN 46