Test Strip; Water Hardness Table; Water Softener Setting - Kernau KDI 6542 User Manual

TEST STRIP

The washing efficiency of the device depends on the softness of the water supplied. In this case the device
is equipped with system, which decreases the water hardness supplied from the water supply network. If
this system is correctly setted, the washing efficieny will be higher. To get to know the water hardness level
supplied to the house, please contact with the water supply company or determine the water hardness level
with the test strip (if is available).
1. Open the test strip.
2. Run water through the tap (1min.)
3. Keep the strip in the water (1sec)
4. Shake the strip.
5. Wait (1min.)
6. Set the hardness level of your machine.

WATER HARDNESS TABLE

LEVEL
1
2
3
4
5
6
The dishwasher is equipped with a water softener which reduces the hardness in the mains water supply. To
find out the hardness level of your tap water, contact your water company or use a test strip (if available).

WATER SOFTENER SETTING:

• Push the programme button and hold it down.
• Turn on the machine.
• Hold down the programme button for 3 seconds until "S" and "L" are shown sequentially in the
display for 2 seconds.
• The machine will display the current setting.
• Set the level by pushing the programme button.
• Switch off the machine to save the setting.
GERMAN DH FRENCH DF
0-5
6-11
12-17
18-22
23-31
32-50
1
2
3
4
5
6
BRITISH DE
0-9
10-20 7-14
21-30 15-21
31-40 22-28
41-55 29-39
56-90 40-63
INDICATOR
The display will
0-6
show "1" then "L".
The display will
show "2" then "L".
The display will
show "3" then "L",
The display will
show "4" then "L".
The display will
show "5" then "L".
The display will
show "6" then "L".
EN
39