Camera; Commissioning And Operation (Software); Switch The Reader On/Off - Siemens SIMATIC Ident RF360M Operating Instructions Manual

Procedure: Removing the pistol handle
Follow these steps to remove the pistol handle:
1. Press the sides of the handle downwards, from the front towards the back of the mobile
reader ①.
2. Guide the handle out of the upper retaining strap hook ②.
Figure 4-14
3. If necessary, re-attach the retaining strap.
4.1.7

Camera

There is a 5 MP autofocus camera with flash/lighting on the rear of the mobile reader. Using
this camera and the corresponding software (app for reading codes), you can optionally also
use the reader to read bar codes and 2D codes.
4.2

Commissioning and operation (software)

4.2.1

Switch the reader on/off

Using the On/Off button on the right of the mobile reader, you can switch the reader on/off
or restart it.
Switching on
To switch the mobile reader on, press the On/Off button on the right of the reader ( ).
As soon as the mobile reader has been switched on, the status LED of the reader lights up
green and the home screen of the operating system or your usual work environment appears
on the display.
Mobile reader SIMATIC RF360M/RF660M
Operating Instructions, 08/2022, C79000-G8976-C660-02
Removing the pistol handle
4.2 Commissioning and operation (software)
Commissioning
27